Table of Contents E70 Interior Lighting Subject Page Introduction .3 EquipmentVariants .4 System Overview .5 Input/Output Interior Lighting .6 Schematic System Circuit Diagram .8 System Components.10 Interior Lighting, Front .10 Roof Function Center .10 Interior Light Unit, Rear.11 Control Units.12 Car Access System 3 .12 Footwell Module.12 J unction Box Control Unit.12 Roof Functions Center .12 Principles of Operation.13 Footwell Module .13 Switching On.13 Switching-On Conditions.14 Switching Off.14 Switch-Off Conditions .14 Electric Load Shut-Down .15 Terminal 58g .15 Hazard Warning Switch.15 Roof Functions Center.16 Interior Lighting Functions .16 Terminal 58g .16 Luggage Compartment Lighting .16 Glove Compartment Lighting .17 Car Access System 3.17 Initial Print Date: 10/06 Revision Date: Interior Lighting Model: E70 Production: From Start of Production ■BIICTItfIS After completion of this module you will be able to: • Identify the components used in the interior lighting system • Explain which control units are responsible for the interior lighting system • Understand the Welcome light feature 2 E70 Interior Lighting Introduction The interior lighting in the E70 is based on the interior lighting system implemented in the E90.The interior lighting comprises the roof area, luggage compartment, footwell and inner door lighting. The lighting in outer area of the doors is provided by the courtesy lighting (outer door handles) and the exit lights. The interior lighting in the roof area on the rear driver and passenger sides consists of two separate lamps. A new feature is the split glove com¬ partment. The complete glove compartment lighting is powered and controlled by an electronic module in the unlocking/release drive unit. The following diagram shows where the control units responsible forthe interior lighting are located in the E70. 1 . 2, 3 I S r. 6 5 4 Index Explanation 1 J unction box control unit 2 Advanced crash safety management 3 Roof function center 4 Car access system 3 5 Comfort Access 6 Footwell module 3 E70 Interior Lighting Equipment Variants The interior lighting system in the E70 is available in the standard version and the option¬ al version SA 563 or included with the premium package. The following table provides an overview showing what components are installed in the respective configuration variant. Component Standard Option SA Frant interior lights unit with: • Interior light with interior light switch X • Reading light with reading light button, driver and passenger X • Top light, driver and passenger X F rant door compartment lighting, driver/passenger side X F rant door handle lighting, driver/passenger side X Front sill lighting, driver/passenger side X Exit light, driver/passenger side X Courtesy lighting, driver/passenger side X Vanity mirror light, driver and passenger X Footwell lights, driver and passenger X Glove compartment light X Rear interior lights unit, driver and passenger side: • Interior light with interior light switch X • Reading light with reading light button, driver and passenger X Rear interior light, driver/passenger side X Rear door compartment lighting, driver/passenger side X Rear door handle lighting, driver/passenger side X Rear footwell lights, driver and passenger X Rear sill lighting, driver/passenger side X Rear exit light, driver/passenger side X Courtesy lighting, driver/passenger side X 4 E70 Interior Lighting System Overview The input/output diagram comes immediately after the following description and shows a general overview of the input and output signals. The status of the door contact (Hall sensor) in the lock (3) changes, for example, when the door is opened with the vehicle unlocked. The footwell module (1) evaluates the sta¬ tus and sends the request to switch on the interior lighting. The roof functions center (10) switches on the interior lighting in the area of the roof. Parallel to this, the exit light (19) of the opened vehicle door as well as the footwell light¬ ing (18) are switched on. The status of the door contact changes again when the vehicle door is closed. The footwell module initiates the procedure to switch off the interior light¬ ing. The status of the rear hatch contact in the rear window central locking (13) changes when the rear hatch is opened. The lighting forthe luggage compartment (14) is con¬ nected to the power supply via terminal 30g so that the luggage compartment lights are switched on via the rear hatch contact. 5 E70 Interior Lighting Input/Output Interior Lighting 6 E70 Interior Lighting Legend for Input/Output Interior Lighting Index Explanation Index Explanation i—1 Footwell module FRM 13 Central locking, rear hatch 2 Driver's door lock barrel 14 Rear reading/interior light 2x 3 Lock with door contact 15 Doorcompartment lighting, rear 4 Front footwell light 2x 16 Door compartment lighting,front 5 Grip recess plate lighting, inner door handle 17 Identification transmitter 6 Courtesy lighting, outer door handle 4x 18 Footwell light 2x 7 Glove compartment button 19 Exit light 4 x 8 J unction box control unitj B 20 Car access system 3 CAS 3 9 Vanity mirror light 2x K-CAN K-CAN BodyCAN 10 Roof functions center KL 30 Kl. 30 Terminal 30 11 Glove compartment light KL 58g Terminal 58g 12 Luggage compartment lighting IB Interior lighting control K-CAN signals at the footwell module In/out Information Source/sink Function In Status, central locking Car access system 3 > footwell module Interior lighting ON In Status, central locking Car access system 3 > footwell module Interior lighting OFF In Crash signal Crash sensor > advanced crash safety management Interior lighting ON Out Electrical load cutout Footwell module > junction box control unit Interior lighting OFF through electrical load cutout Out Status, terminal 58g Light switch > footwell module Instrument lighting ON (control buttons, instrument cluster, gear selector lever) 7 E70 Interior Lighting Schematic System Circuit Diagram 8 E70 Interior Lighting Legend for Schematic System Circuit Diagram Index Explanation Index Explanation 1 Lighting in driver's door 16 Automatic soft-close drive unit 2 Footwell light, driver's side 17 Central locking, rear hatch 3 Glove compartment unlock drive unit 18 Rear hatch contact 4 Footwell light, front passenger's side 19 Interior/reading light, rear driver's side 5 Glove compartment light 20 Footwell light, rear driver's side 6 Lighting in passenger's door 21 Roof functions center FZD with interior/reading light and top light at front 7 J unction box control unitj B 22 Footwell module FRM 8 Lighting in door, rear passenger's side 23 Lighting in door, rear driver's side 9 Footwell light, rear right 24 Vanity mirror light with switch, driver's side 10 Interior/reading light, rear passenger's side 25 Vanity mirror light with switch, passenger's side 11 Connection to junction box control unit K-CAN Body CAN 12 Relay for automatic soft-close drive unit KL 30 Terminal 30 13 Luggage compartment light, right KL 58g Terminal 58g 14 Luggage compartment light, left IB Interior lighting control 15 Outer rear hatch button Note: Concerning item 3:The in-car unlock/release drive unitofthe glove com¬ partment supplies the power forthe glove compartment lighting (5). K-CAN signals at the footwell module In/out Information Source/sink Function In Status, central locking Car access system 3 > footwell module Interior lighting ON In Status, central locking Car access system 3 > footwell module Interior lighting OFF In Crash signal Crash sensor> advanced crash safety management Interior lighting ON Out Electrical load cutout Footwell module > junction box control unit Interior lighting OFF through electrical load cutout Out Status, terminal 58g Light switch > footwell module Instrument lighting ON (control buttons, instrument cluster, gear selector lever) 9 E70 Interior Lighting System Components Interior Lighting, Front The components for the interior lighting in the front roof area are integrated in the roof functions center and in the sun visors. The footwell lighting is located on the underside of the dashboard. Roof Function C enter The interior light unit is integrated in the roof functions center. Therefore, a roof functions center is always installed in the E70. The vanity mirror lighting on the driver and passenger sides is powered bythe rooffunc- tions center. Various equipment options make it necessary to install additional components in the roof functions center. If a panoramic glass roof is installed, the roof functions center contains not only the but¬ ton forthe panoramic glass but also the necessary control and monitoring facilities. The ultrasonic interior movement detector is completely integrated in the roof function center on vehicles equipped with an anti-theft alarm system. The rood function center simply loops through the signals for all other components. This means the components are connected directly to their respective control units. These components are: • Emergency call button • Passenger airbag OFF lamp • M icrophone fortelephone • M icrophone forvoice input. Index Explanation 1 Openings for ultrasonic interior movement detector 2 Ambient lighting 3 Passenger's side microphone forvoice input 4 Passenger airbag OFF light 5 Passenger's reading lamp 6 Interior light 7 Passenger's reading light button 8 Interior lighting button 9 Driver's reading light button 10 Driver's reading light 11 Emergency call button 12 Button for panoramic glass roof 13 Telephone microphone, driver's side 10 E70 Interior Lighting Interior Light Unit, Rear Two versions of the rear interior light unit are available for the E70: • Standard version connected directly to the footwell module • Optional version connected directly to the roof functions center. In the standard version, the E70 has one interior light at the rear left and right. The optional version features one interior light unit at the rear left and right. The interior light unit consists of: • Reading light, rear left/right with button • Interior light. Index Explanation 1 Interior light, rear 2 Rear interior light with button and reading lamp 3 Rear interior light, panoramic glass roof 4 Rear interior light, panoramic glass roof with button and reading light 11 E70 Interior Lighting Control Units The "interior lighting" function is distributed over several control units that communicate with each other via the K-CAN.The individual control units are described in the following. Car Access System 3 The car access system 3 sends the request to unlock/lock the central locking via the K- CAN. The signals are required to switch the interior lighting on and off. Footwell Module Based on the signals from the car access system 3, the footwell module recognizes the request to switch the interior lighting on/off. The following components are actuated directly by the footwell module: • Courtesy lighting • Exit lights • Handle-recess light • Storage space lighting • Footwell lighting The footwell module sends the roof function centerthe information to switch on the inte¬ rior lighting in the roof area. The individual lamps are activated by the roof functions cen¬ ter. The footwell module evaluates the status of the door contacts. The interior lighting is switched on when a door is opened. J unction Box Control Unit The junction box control unit is the interface to the luggage compartment and glove com¬ partment lighting. It supplies the power (terminal 30g) the lighting in the luggage com¬ partment. For lighting purposes, it reads the status of the button for unlocking and releas¬ ing the glove compartment. The junction box control unit is connected directly to the electronics of the unlock/release device on the left and right, which it uses to make available the start signal for unlocking the glove compartment. Roof Functions Center The roof functions center directly activates the front interior light unit and powers the rear interior light uniton the C-pillar. T he vanity mirrors are also powered by the roof function center. 12 E70 Interior Lighting Principles of Operation The interior lighting on the E70 is switched on and off by the footwell module FRM . The roof functions center FZD is responsible forthe interior lighting components in the roof area. The luggage compartment lighting is connected directly to terminal 30g.The following description outlines the interaction between the control units and functions in the interi¬ or lighting system. Footwell Module The footwell module is the central control unit forthe interior lighting system. All interior lighting outputs of the footwell module are pulse-modulated. This ensures the interior lighting functions at a constant brightness level in the event of voltage fluctuations. The pulse width modulation is additionally used forthe soft ON/soft OFF function. The footwell module features the following functions forthe interior lighting: • Switching the interior lighting on/off • Electric load shut-down after8 minutes • Lighting via terminal 58g. Switching On The footwell module receives numerous input signals that switch on the interior lighting. The input signals from the footwell module are read in directly or received via the K- CAN.The input signals forthe interior lighting are listed in the following. InputSignals From Central locking signals CAS 3 Crash signal ACSM Door contacts FRM Driver's door barrel lock FRM Interior light switch FRM/FZD Central locking, rear hatch J B 13 E70 Interior Lighting Switching-on Conditions The interior lighting is switched on in response to one of the following conditions for switching on the interior lighting. The switch-on function is limited in terms of time. The electrical loads are: • Unlock via barrel lock in driver's door • Unlock via remote control/identification transmitter • Terminal R OFF when terminal 58g was ON max. 2 minutes ago • Lock button on remote control/identification transmitter pressed when the central locking has been in central arrest state for longer than 10 s The interior lighting remains permanently switched on in certain situations. These situa¬ tions are: • Receiving crash signal • Interior lighting button briefly pressed. Switching Off Thefootwell module receives numerous signals to switch off the interior lighting. The sig¬ nals are received via the K-CAN or are read in directly by the footwell module. Switch-off Conditions The interior lighting is switched off underthe following conditions: • Central locking in central arrest, all doors and the rear hatch are closed • Terminal R OFF after8 minutes (electric load shut-down) • Interior lighting button pressed forlongerthan 3 s • Terminal R ON with doors closed • Terminal 58g ON and terminal R OFF. The interior lighting is switched off if no door is opened within 20 s. • The interior lighting is switched off if the vehicle is unlocked via the remote control/identification transmitter and no door is opened after 20 s. • Terminal R OFF and a vehicle door is opened forlongerthan 1 minutes • "Powerdown" via diagnosis 14 E70 Interior Lighting Electric Load Shut-Down As from terminal R OFF, the interior lighting system is switched off by the footwell module after 8 minutes. Forthis purpose, the footwell module sends the electric load shut-down information via the K-C AN. The roof functions center FZD receives this information and switches off the interior light¬ ing in the roof area. The interior lights that are switched on directly by the footwell module are also switched off. Terminal 58g The footwell module makes available terminal 58g via the K-CAN or conventionally wired. Terminal 58g is pulse width-modulated and features the following two brightness levels: • The brightness level forthe locator lighting is individually adjustable using the thumb wheel on the lights operating unit. • The brightness level forthe function lighting is not dimmed and is switched on at full brightness. Hazard Warning Switch As soon as the hazard warning switch is pressed, the footwell module switches on the switch lighting at full brightness. Note: The hazard warning switch is not illuminated at full brightness level atter- minal 58g. The brightness depends on the setting of the locator lighting. 15 E70 Interior Lighting Roof Functions Center Forthe interior lighting system, the roof functions center represents the interface to the footwell module. Both control units are connected to the K-CAN to facilitate communica¬ tion between each other. For instance, the roof functions center receives the instruction to switch the interior lighting on or off via the K-CAN. The roof functions center is the link to the interior lights on the left and right in the rear area of the roof. Interior Lighting Functions The interior lighting functions in the roof functions center are: • Switching the interior lighting on/off on request from the footwell module • Reading the signals from the interior light buttons and transferring them to the footwell module • Reading the signals from the interior light buttons at the rear left and right and trans¬ ferring them to the footwell module. Terminal 58g The roof functions center receives the terminal 58g signal from the footwell module via the K-CAN and activates the lighting in the buttons. Luggage Compartment Lighting The junction box control unit provides the power supply (terminal 30g) forthe luggage compartment lighting. The status of the rear hatch contact changes when the rear hatch is opened manually or via the remote control/identification transmitter. This means the luggage compartment lights are connected to ground and therefore switched on. The status of the rear hatch contact changes when the rear hatch is closed again. The ground connection is interrupted and the luggage compartment lighting switched off. 16 E70 Interior Lighting Glove Compartment Lighting The electronics in the unlock/release devices of the glove compartment receive the request to open the glove compartment when the button to open the glove compartment is pressed. The junction box control unit reads in and makes available the signal from the button. The electronic module in the unlock/release device (on inside of vehicle) evaluates the signal and switches on the glove compartment lighting.T he lighting is switched on with the "S oft 0 N" function and off with the "S oft 0 F F" function. This function is derived from the interior lighting. The glove compartment lighting is switched off by closing the glove compartment. Note: The electronic module in the unlock/release device on the innerside of the vehicle is always responsible forthe glove compartment lighting. The glove compartment lighting is connected directly to terminal 30g. Car Access System 3 The car access system 3 makes available the status of the central locking system via the K-CAN. In this way, the footwell module recognizes when the vehicle has been unlocked and consequently switches on the interior lighting. 17 E70 Interior Lighting